APC (Armored Personnel Carrier) B6-armoured
Ballistic Specifications Joz Armor’s B6 level are armoured using materials, both opaque and transparent, that meet or exceed the requirements of the European CEN 1522/23 and CEN 1063 standards to the level FB6 for opaque areas and BR6 for transparent areas.

Armouring

All four sides of the passenger compartment and the roof of the vehicle are protected using high-quality armour steel and glass defeating 7.62x51mm M80 Nato Ball ammunition (U.S. NIJ level III, CEN level FB6/BR6) and 5.56x45 SS109 ammunition (CEN level FB5/BR5 and FB6/BR6) at 0° incidence (90° to the surface) and 10m range according to CEN1063 and CEN1522.

Opaque Areas: All opaque areas including the roof are protected against the following and all lesser weapons/ ammunitions at 90° impact angle in accordance with the above specifications.

• Calibre 7.62 x 39 mm, FJ/PB/FeC, AK 47 Kalashnikov
• Calibre 5.56 x 45 mm, FJ/PB/SCP, M16 Colt
• Calibre 7.62 x 51 mm, FJ/PB/SC, (FN) “FAL” / “LAR” NATO rifle

Transparent Areas: All transparent areas are multi-layer and polycarbonate coated to protect against the following and all lesser weapons/ammunitions at 90° impact angle in accordance with the above specifications.

• Calibre 7.62 x 39 mm, FJ/PB/FeC, AK 47 Kalashnikov
• Calibre 5.56 x 45 mm, FJ/PB/SCP, M16 Colt
• Calibre 7.62 x 51 mm, FJ/PB/SC, (FN) “FAL” / “LAR” NATO rifle


Floor:
The floor of the vehicle is designed to defeat the following threat:

• Two DM 51 (German Norm) detonated simultaneously


Armouring design:
• The armouring is a complete self-supporting structure grafted onto the base vehicle chassis in place of the original bodywork creating a unitary protection cell for the passengers.
• The main armour shell provides overlap for all the secondary armour components such as the doors and the windows, roof hatches, gun-ports etc.
• Double floor protection for improved blast resistance
• Heavy-duty hinges for all the opening elements (doors, hatches).
• Hinges with in-built door-stop.
• Fuel-tank(s) protected with steel armour-plates.
• Full engine compartment protection, including bonnet.
• All welded joints produced using a special welding technique limiting the heat- transfer to the armour steel around the weld, and covered with non-heat- affected overlaps.

B6 package included:
• Side and rear-facing gun-ports
• Front Roof-hatch
• Fuel-tank protection
• Upgraded suspension to cope with the additional weight due to armouring
• Run-flat systems on all 5 wheels
• Rear crew compartment manual air-cooler
• Roof-mounted turret


Further optional equipment(Additional cost)
Further optional equipment available at extra cost, such as :
• Additional roof-hatches
• Blast-mitigating seats
• Alternative seating layouts
• 16x8 split-rim wheels with CTIS
• Turbocharger with intercooler
• Tool-kit, hydraulic heavy-duty jack, fire extinguisher
• First-aid kit and stretcher
• 2-way intercom
• Front and rear strobe-lights
• Police siren/Public address system
• Bull-bar
• Communications equipment (VHF, UHF, satellite...)
• Electronic Counter Measure Equipment (RF Jammer)
• Video recording/surveillance equipment
• Higher ballistic protection level
• Additional blast protection


Base vehicle: Toyota Land Cruiser 70-Series, 4WD